Investigation of 3D Printed Honeycomb Cores by Varying Printing Parameters for Different Loading Conditions / (Record no. 608759)
[ view plain ]
| 000 -LEADER | |
|---|---|
| fixed length control field | 02050nam a22001577a 4500 |
| 082 ## - DEWEY DECIMAL CLASSIFICATION NUMBER | |
| Classification number | 670 |
| 100 ## - MAIN ENTRY--PERSONAL NAME | |
| Personal name | Rashid, Muhammad Fahad |
| 245 ## - TITLE STATEMENT | |
| Title | Investigation of 3D Printed Honeycomb Cores by Varying Printing Parameters for Different Loading Conditions / |
| Statement of responsibility, etc. | Muhammad Fahad Rashid |
| 264 ## - PRODUCTION, PUBLICATION, DISTRIBUTION, MANUFACTURE, AND COPYRIGHT NOTICE | |
| Place of production, publication, distribution, manufacture | Islamabad : |
| Name of producer, publisher, distributor, manufacturer | SMME- NUST; |
| Date of production, publication, distribution, manufacture, or copyright notice | 2024. |
| 300 ## - PHYSICAL DESCRIPTION | |
| Extent | 69p. |
| Other physical details | Soft Copy |
| Dimensions | 30cm |
| 500 ## - GENERAL NOTE | |
| General note | Light weight components having greater strength and lower manufacturing cost are the need<br/>of the hour especially for aerospace industries. For this, honeycomb sandwich structures of<br/>various materials and parameters are developed by Additive Manufacturing (AM) to meet the<br/>desired output of sufficient strength to withstand compression and flexural loading. In this<br/>paper, the honeycomb structures are fabricated using a fused filament fabrication (FDM)<br/>technique. The effect of different printing conditions on the compressive and flexural properties<br/>of the 3D-printed honeycomb structures made of PLA, ABS and PLA+ polymeric laminates<br/>are investigated experimentally and analyzed by Taguchi and ANOVA (Analysis of Variance).<br/>Three build orientations, i.e., 0, 45 and 90 degrees, with layer heights of 0.1, 0.2 and 0.3 mm<br/>are considered for the 3D printing. Moreover, Multi-objective optimization is performed to<br/>optimize the strength and printing time (cost) of L27 array samples. Results show that 90ᵒ and<br/>0ᵒ build orientations with 0.3 mm layer height being PLA and PLA+ the best materials are the<br/>optimum conditions for compressive and flexural mode of testing, respectively. The results<br/>deduced that compressive and flexural samples could withstand maximum load of 69,000N<br/>and 120 N with minimum printing time. Thus. it would be fruitful in harnessing energy for the<br/>development of sustainable printing of durable components. |
| 650 ## - SUBJECT ADDED ENTRY--TOPICAL TERM | |
| Topical term or geographic name entry element | MS Design and Manufacturing Engineering |
| 700 ## - ADDED ENTRY--PERSONAL NAME | |
| Personal name | Supervisor : Dr. Muhammad Salman Khan |
| 856 ## - ELECTRONIC LOCATION AND ACCESS | |
| Uniform Resource Identifier | <a href="http://10.250.8.41:8080/xmlui/handle/123456789/42770">http://10.250.8.41:8080/xmlui/handle/123456789/42770</a> |
| 942 ## - ADDED ENTRY ELEMENTS (KOHA) | |
| Source of classification or shelving scheme | |
| Koha item type | Thesis |
| Withdrawn status | Permanent Location | Current Location | Shelving location | Date acquired | Full call number | Barcode | Koha item type |
|---|---|---|---|---|---|---|---|
| School of Mechanical & Manufacturing Engineering (SMME) | School of Mechanical & Manufacturing Engineering (SMME) | E-Books | 04/01/2024 | 670 | SMME-TH-1003 | Thesis |