NUST Institutions Library Catalogue Search for 'Provider:NED University'

Constitutive Modelling of Ferrocement Elements

By Jokhio, Gul Ahmed. Karachi : NED University of Engineering, 2002 . xxii, 222p. : 29 cm.

Place Hold on Constitutive Modelling of Ferrocement Elements

Bain-ul-aqwami taluqat aur alam e Islam : 1997 and 1998 ke aham waqait elmi tanazir me

By Affan Saljoq. Karachi: NED University, . 148 p. : 22 cm.. -

Place Hold on Bain-ul-aqwami taluqat aur alam e Islam : 1997 and 1998 ke aham waqait elmi tanazir me

Control system design of a guide missile

By Mohammad. Karachi NED University 1984 . x, 216p. , BE Project Reports

Place Hold on Control system design of a guide missile

Aerodynamic study and design of a helicopter

By Sabahat Khan. Karachi NED University 1984 . 164p. , BE Project Reports

Place Hold on Aerodynamic study and design of a helicopter

Fabrication of the CAE Remotely Piloted Vehicle G-21

By Tanveer Shehzad. Karachi NED University Karachi 1985 . 61 p. , BE Project Reports

Place Hold on Fabrication of the CAE Remotely Piloted Vehicle

Fabrication of wing for CAE man powered aircraft G-21

By Rizwan Pasha; Ejaz Yaqoob, advisor. Karachi NED University 1985 . 96 p. , BE Project Reports

Place Hold on Fabrication of wing for CAE man powered aircraft

fabrication and testing of three dimensional wing project G-21

By Ijaz Noor;. Karachi NED University 1985 . 200 p. , BE Project Reports

Place Hold on fabrication and testing of three dimensional wing project

Installation and analysis of heat pump unit G-21

By Farooq Shahid; Khalid Parvez, advisor. Karachi NED University 1985 . 107 p. , BE Project Reports

Place Hold on Installation and analysis of heat pump unit

Dynamic stability analysis of an aircraft through computer programme G-21

By Anwar; Ijaz A Malik, Advisor. Karachi NED University 1985 . 154 p. , BE Project Reports

Place Hold on Dynamic stability analysis of an aircraft through computer programme

stability of cylindrical shell under different types of loading G-21

By Mohammad Amin;. Karachi NED University 1985 . 117 p. , BE Project Reports

Place Hold on stability of cylindrical shell under different types of loading

Dynamic response of a pitch rate control system for an air to air cruise form guided missile G-21

By Zahid Baig;. Karachi NED University 1985 . 122 p. , BE Project Reports

Place Hold on Dynamic response of a pitch rate control system for an air to air cruise form guided missile

Determination of static stability of an aircraft through wind tunnel tests G-21

By Hafeez. Karachi NED University 1985 . 152 p. , BE Project Reports

Place Hold on Determination of static stability of an aircraft through wind tunnel tests

Effect of winglets on 3D wings G-21

By Mahmood Abdul Jabbar IRAQ A F. Karachi NED University 1985 . 208 p. , BE Project Reports

Place Hold on Effect of winglets on 3D wings

Design of an overlapping wing aircraft G-21

By Jehanzeb Masud. Karachi NED University 1985 . 100 p. , BE Project Reports

Place Hold on Design of an overlapping wing aircraft

To verify prandtl gluaert similarity rule G-21

By Nisar Kingravi; Zakir Khan, Advisor. Karachi NED University 1985 . 134p. , BE Project Reports

Place Hold on To verify prandtl gluaert similarity rule

Design of a turbo jet engine axial flow turbine G-21

By Naeem ud Din. Karachi NED University 1985 . 116 p. , BE Project Reports

Place Hold on Design of a turbo jet engine axial flow turbine

Design of a turbo jet engine axial flow compressor G-21

By Abdul Hayee. Karachi NED University 1985 . 118 p. , BE Project Reports

Place Hold on Design of a turbo jet engine axial flow compressor

Study of vibratory behaviour of continuous bodies G-22

By Saleem ur Rehman. Karachi NED University 1986 . 157 p. , BE Project Reports

Place Hold on Study of vibratory behaviour of continuous bodies

Study of thrust augmentation processes of jet engines G-22

By Ali Nadeem. Karachi NED University 1986 . 165 p. , BE Project Reports

Place Hold on Study of thrust augmentation processes of jet engines

Self study of rocket engine performance and evaluation of performance parameters G-22

By Anwar Hasan. Karachi NED University 1986 . 122 p. , BE Project Reports

Place Hold on Self study of rocket engine performance and evaluation of performance parameters

Shakedown analysis of beam and framed structures G-22

By Ehsanullah; Muzzafar Haider, advisor. Karachi NED University 1986 . 155 p. , BE Project Reports

Place Hold on Shakedown analysis of beam and framed structures

To Predict the Off-Design Performance of Axial-Flow Multistage Compressors and to write a computer programme

By Inam-Ul-Haq Raja. Karachi NED University 1985 . 134p , Project Reports

Place Hold on To Predict the Off-Design Performance of Axial-Flow Multistage Compressors and to write a computer programme

Verification of Theodorson's thick Aerofoil Theory Project

By Noor Abbas. Karachi NED University 1985 , BE Project Reports

Place Hold on Verification of Theodorson's thick Aerofoil Theory Project

Structural Design and Fabrication of fuselage of CAE light Aircraft

By Nadeem Jalil. Karachi NED University 1985 . 113p , BE Project Reports

Place Hold on Structural Design and Fabrication of fuselage of CAE light Aircraft

To verify Prandtl Gluaert Similarity Rule

By SHARAF RABBANI. Karachi NED University 1985 . 165p , BE Project Reports

Place Hold on To verify Prandtl Gluaert Similarity Rule

Wind Tunnel testing of CAEOverlapping winged Aircraft

By Zaeem Masud. Karachi NED UNiversity 1985 . 190p , BE Project Reports

Place Hold on Wind Tunnel testing of CAEOverlapping winged Aircraft

Redesign of F-6 Wing

By Khurram Rehman. Karachi NED University 1985 . 220p , BE Project Reports

Place Hold on Redesign of F-6 Wing

Design of Axial Flow Compresser

By Ateeque. Karachi NED University 1985 . 154p , BE Project Reports

Place Hold on Design of Axial Flow Compresser

Structural Design and Fabrication of Control Surfaces of light Aircraft

By Nasir Maqsood Sulery. Karachi NED University 1985 . 94p , BE Project Reports

Place Hold on Structural Design and Fabrication of Control Surfaces of light Aircraft

Installation testing and calibration of universal vibration apparatus G-24

By Waleed A Rehman,UO IAF. Karachi NED University 1988 . 59 p. , BE Project Reports

Place Hold on Installation testing and calibration of universal vibration apparatus

Design of Air Combat Fighter XF-23 A Moos

By Rashid Ali Al Saadi. Karachi NED University 1985 . 110p , BE Project Reports

Place Hold on Design of Air Combat Fighter XF-23 A Moos

Foundation wiring and pipe diagrams of compressors dryer unit and storage tank of supersonic wind tunnel along with the layout and packing and transportation procedures of the tunnel G-24

By Jamil Ahmad Qureshi. Karachi NED University 1988 . 97 p. , BE Project Reports

Place Hold on Foundation wiring and pipe diagrams of compressors dryer unit and storage tank of supersonic wind tunnel along with the layout and packing and transportation procedures of the tunnel

Electrical /pressure pipe diagrams of supersonic wind tunnel and its caliberation G-24

By Khurram Bashir. Karachi NED University 1988 . vii, 43 p. , BE Project Reports

Place Hold on Electrical /pressure pipe diagrams of supersonic wind tunnel and its caliberation

Transportation of subsonic wind tunnel and the two balance systems G-24

By Ishaat Saboor Khan. Karachi NED University 1988 . vi, 76 p. , BE Project Reports

Place Hold on Transportation of subsonic wind tunnel and the two balance systems

Design & Manufact of Fixtures Measurement of Mirage III A/C Fabrication of Mirage III model to be tested in CAE wind

By Rashid Al Saadi. Karachi NED University 1985 . 91p , BE Project Reports

Place Hold on Design & Manufact of Fixtures Measurement of Mirage III A/C Fabrication of Mirage III model to be tested in CAE wind

caliberation of subsonic wind tunnel G-24

By Jawad A Toor. Karachi NED University 1988 . viii, 52 p. , BE Project Reports

Place Hold on caliberation of subsonic wind tunnel

Design of jigs and fixtures and disassembly reassembly sequence for shifting of subsonic wind tunnel G-24

By Amjad Mahmud. Karachi NED University 1988 . viii, 73 p. , BE Project Reports

Place Hold on Design of jigs and fixtures and disassembly reassembly sequence for shifting of subsonic wind tunnel

Transportation re-installation, calibration and experimentation of MAN torsional testing machine G-24

By Azhar Sajjad. Karachi NED University 1988 . 61 p. , BE Project Reports

Place Hold on Transportation re-installation, calibration and experimentation of MAN torsional testing machine

Aerodynamic analysis of F-6 model aircraft G-24

By Irfan; Shiraz, Advisor. Karachi NED University 1988 . vii, 50 p. , BE Project Reports

Place Hold on Aerodynamic analysis of F-6 model aircraft

re-installation, calibration and running of Amsler 10 ton tensile testing machine G-24

By Shafqat Ali Bhatti. Karachi NED University 1988 . ix, 51 p. , BE Project Reports

Place Hold on re-installation, calibration and running of Amsler 10 ton tensile testing machine

MAN 60 ton universal testing machine G-24

By Umar Qayyum S M. Karachi NED University 1988 . vi, 100 p. , BE Project Reports

Place Hold on MAN 60 ton universal testing machine

To study the axial flow compressor by actuator disc theory G-23

By Malik M Rafique; Zaidi SM and khalid parvez, advisors. Karachi, Korangi Creek NED University 1988 . xiv, 144 p. , BE Project Reports

Place Hold on To study the axial flow compressor by actuator disc theory

Variable area supersonic inlet design G-23

By Rana Zahid F A; Zaidi SKN, advisors. Karachi, Korangi Creek NED University 1987 . ix, 122 p. , BE Project Reports

Place Hold on Variable area supersonic inlet design

To study the effect of sweep back wing performance G-23

By Akhlaq A Khan. Karachi, Korangi Creek NED University 1985 . xi, 186 p. , BE Project Reports

Place Hold on To study the effect of sweep back wing performance

Computer simulation of methods of characteristics G-23

By Sohail E James; shiraz aslam, advisor. Karachi, Korangi Creek NED University 1985 . xi, 120 p. , BE Project Reports

Place Hold on Computer simulation of methods of characteristics

Comparison of forward swept and aft swept wing in subsonic regime G-23

By Shahid Hamid; Khalid Khan, advisor. Karachi, Korangi Creek NED University 1985 . xi, 224 p. , BE Project Reports

Place Hold on Comparison of forward swept and aft swept wing in subsonic regime

Design and fabrication of CAE light aircraft wing G-22

By Munir M Baig GC; Ejaz Yaqoob, advisor. Karachi NED University 1985 . ix, 100 p. , BE Project Reports

Place Hold on Design and fabrication of CAE light aircraft wing

Design of a combustion chamber (inlet) G-22

By Rahman Gul; Khalid Parvez, advisor. Karachi NED University 1985 . x, 108 p. , BE Project Reports

Place Hold on Design of a combustion chamber (inlet)

fabrication of wing for CAE man powered aircraft G-22

By Mohammad Munawar Javed; Ejaz Yaqoob, advisor. Karachi NED University 1985 . vii, 158 p. , BE Project Reports

Place Hold on fabrication of wing for CAE man powered aircraft

Study of ejector nozzle G-22

By Muhammad Afzal;. Karachi NED University 1985 . viii, 52 p. , BE Project Reports

Place Hold on Study of ejector nozzle