NUST Institutions Library Catalogue Search for 'an:16090'

Contention based collision resolation medium access control algorithms

By KARTSAKHI. 2009 139781606925805

Place Hold on Contention based collision resolation medium access control algorithms

Numerical Simulation and Experimentation of APFSDS Round on Armored Protection Box /

By Muneeb, Adil. Islamabad : SMME - NUST, 2016 . 60 p. : ill. ; , Hard Cover. 30 cm..

Place Hold on Numerical Simulation and Experimentation of APFSDS Round on Armored Protection Box /

Phenomenological Modeling of Soot Process in Diesel Engine Combustion

By Azeem, Fozul Baig. Islamabad: SMME - NUST, 2015 . ii, 36 p. ill.; , Hardcover

Place Hold on Phenomenological Modeling of Soot Process in Diesel Engine Combustion

Investigation And Improvement of Anti-Corrosion Performance In Automobile Bodies /

By Ahmed, Shehryar Khan Niazi. Islamabad : CEME - NUST, 2016 . xiv, 49 p.: ill.; , HardCover. 30cm..

Place Hold on Investigation And Improvement of Anti-Corrosion Performance In Automobile Bodies /

Parametric study of M-Cycle Evaporator Cooler / Muhammad Zulfiqar

By Zaulfiqar, Muhammad. Islamabad: SMME - NUST, 2018 . ii, 38 p. : ill. ; , Hardcover

Place Hold on Parametric study of M-Cycle Evaporator Cooler /

Design and Analysis of Composite drive Shaft /

By Masood, Kashif. Islamabad : SMME - NUST 2016 . 62 p. : ill. ; , Hardcover. 30cm..

Place Hold on Design and Analysis of Composite drive Shaft /

Classification of Functional motions of Hand for Upper Limb Prosthesis With Surface Electromyography (EMG) /

By Waris, Muhammad Asim. Islamabad : SMME - NUST 2013 . 86 p. : ill, ; , Hardcover. 30cm..

Place Hold on Classification of Functional motions of Hand for Upper Limb Prosthesis With Surface Electromyography (EMG) /

Evaluation of Eddy Current Signatures for Predicting Different Heat Treatment Effects in Chromium- Vanadium (Cr-V) Spring Steel /

By Hashmi, Javeria. Islamabad : SMME - NUST 2015 . ix, 68 p. : ill. ; , Hardcover. 30cm..

Place Hold on Evaluation of Eddy Current Signatures for Predicting Different Heat Treatment Effects in Chromium- Vanadium (Cr-V) Spring Steel /

Effect Of Processing Variables on Weld Joint And Micro-Structural Formation Using Gas Tungsten ARC Welding (GTAW) /

By Ali, Asim. Islamabad: CEME NUST, 2015 . xiii, 82 p.: ill.; , Hardcover. 30cm..

Place Hold on Effect Of Processing Variables on Weld Joint And Micro-Structural Formation Using Gas Tungsten ARC Welding (GTAW) /

Micromechanical Modeling of 8-Harness Satid Weave Glass Fiber Reinforced Phenolic Composites Using Finite Element Analysis /

By Hassan, Abid. Islamabad : CEME - NUST, 2013 . xiv, 127 p. : ill. ; , Hardcover. 30cm..

Place Hold on Micromechanical Modeling of 8-Harness Satid Weave Glass Fiber Reinforced Phenolic Composites Using Finite Element Analysis /

A Neural Network based Control for Semi-Active Suspension of Military Truck 5 ton Hino GT /

By Zafar, Salman. Islamabad : CEME - NUST, 2018 . xiii, 73 p. : ill. ; , Hardcover. 30cm..

Place Hold on A Neural Network based Control for Semi-Active Suspension of Military Truck 5 ton Hino GT /

Design of Universal Joins for Heavy Loads /

By Khan, Muhammad Raza Ahmed . Islambad : CEME - NUST, 2018 . xiv, 52 p. : ill. ; , Hard cover. 30cm..

Place Hold on Design of Universal Joins for Heavy Loads /

Slat Armour Increase in Effectiveness and Step towards Modular Approach /

By Shafi, Ayesha. Islamabad : CEME - NUST, 2016 . 58 p. : ill. ; , Hardcover. 30cm..

Place Hold on Slat Armour Increase in Effectiveness and Step towards Modular Approach /

Numerical and Experimental Investigation of Interlaminar Shear Failure in 3D Woven Composites using Short Beam Shear Test Method /

By Rizwan ul Haq, Muhammad . Islambad : CEME - NUST, 2014 . xviii, 118 p. : ill. ; , Hard cover. 30cm..

Place Hold on Numerical and Experimental Investigation of Interlaminar Shear Failure in 3D Woven Composites using Short Beam Shear Test Method /

Investigation of tool management strategies for a flexible manufacturing System /

By Shah, Suhail Ahmed . Islamabad : SMME - NUST, 2016 . vi, 67 p. : ill. ; 30cm..

Place Hold on Investigation of tool management strategies for a flexible manufacturing System /

Statistical analysis of Electron beam welded 10mm Thick KOVAR Plate Using Taguchi method /

By Rafique, Shazia . Islamabad : SMME - NUST, 2018 . 79 p. : ill. ; 30cm..

Place Hold on Statistical analysis of Electron beam welded 10mm Thick KOVAR Plate Using Taguchi method /

Development And Analysis of Steering Mechanism for Multi - Axle Wheeled Vehicles /

By Ahmed, Waqar. Islamabad : CEME - NUST, 2018 . xv, 82 p. : ill. ; 30cm..

Place Hold on Development And Analysis of Steering Mechanism for Multi - Axle Wheeled Vehicles /

Multi-Domain Modeling of Pan Tilt Platform with Mechanical Imperfections /

By Haider, Muhammad. Islamabad: CEME - NUST, 2013 . 83 p.: ill.; 30cm..

Place Hold on Multi-Domain Modeling of Pan Tilt Platform with Mechanical Imperfections /

Finite Element Analysis of Knee Implant for Orthopedic Applications /

By Zahir, Mian Muhammad Asim. Islamabad: SMME - NUST, 2015 . 32 p.: ill.; 30cm..

Place Hold on Finite Element Analysis of Knee Implant for Orthopedic Applications /

Design and Development of Experimental Hardware in Loop Model for the Study of Induced Vibration in Tall Structure with Active Control

By Bashir, Nauman. Islamabad: SMME - NUST, 2016 . 51 p.: ill.; 30cm..

Place Hold on Design and Development of Experimental Hardware in Loop Model for the Study of Induced Vibration in Tall Structure with Active Control

Synthesis Of 99m Tc-HYNIC-5-Fu As Imaging Probe Its Biodistribution Studies In Animal Model /

By Kiani, Maria Mehboob. Islamabad: SMME - NUST. 2017 . 55 p.: ill.; 30cm..

Place Hold on Synthesis Of 99m Tc-HYNIC-5-Fu As Imaging Probe Its Biodistribution Studies In Animal Model /

Feasibility For Establishment of Turbines Manufacturing Facility At Heavy Mechanical Complex /

By Wajahat, Muhammad. Islamabad: SMMe - NUST, 2017 . 104 p.: ill.; 30cm..

Place Hold on Feasibility For Establishment of Turbines Manufacturing Facility At Heavy Mechanical Complex /

Modeling and Digital Control of Quarter Car Suspension System Test Rig

By Alam, Syed Hashim Raza. Islamabad: SMME - NUST, 2015 . 46 p.: ill.; 30cm..

Place Hold on Modeling and Digital Control of Quarter Car Suspension System Test Rig

Numerical Simulation of two Particles in a bended Micro channel /

By Iqrar, Syed Atif.. Islamabad: SMME - NUST, 2019 . 36 p. : ill. ; 30cm..

Place Hold on Numerical Simulation of two Particles in a bended Micro channel /

Analysis of Micro- Heat Exchanger for High Heat Flux /

By Khan, Muhammad Zia Ullah.. Islamabad: SMME - NUST, 2018 . 45 p. : ill. ; 30cm..

Place Hold on Analysis of Micro- Heat Exchanger for High Heat Flux /

Metal Erosion due to Particles at High Velocity, Pressure and Temperature /

By Zaheer, Bushra.. Islamabad: SMME - NUST, 2018 . 35 p. : ill. ; 30cm..

Place Hold on Metal Erosion due to Particles at High Velocity, Pressure and Temperature /

Development of Test Bench for the Characterization of Shape Memory alloy Wire /

By Khan, Haroon Ahmed.. Islamabad: SMME - NUST, 2018 . 48 p. : ill. ; 30cm..

Place Hold on Development of Test Bench for the Characterization of Shape Memory alloy Wire /

Energy and Exergy Analysis of Solar Assisted Cascade Vapor Compression and Absorption Refrigeration System with Different Alternate Refrigerants /

By Muhammad Tahir Yamin. Islamabad: PNEC NUST, 2015 . 75 p. : 30cm..

Place Hold on Energy and Exergy Analysis of Solar Assisted Cascade Vapor Compression and Absorption Refrigeration System with Different Alternate Refrigerants /

TH-SOF-1575-Modeling and Control of Battlefield Extraction Assist Robot /

By Malik, Zeeshan. Islamabad: CEME NUST, 2018 . 65 p. : 30cm..

Place Hold on TH-SOF-1575-Modeling and Control of Battlefield Extraction Assist Robot /

Micro Scanning stage Design with Actuator /

By Sheikh, Rehan Ahmed. Islamabad: CEME NUST, 2018 . 59 p. : 30cm..

Place Hold on Micro Scanning stage Design with Actuator /

Feature clustering based approach for generation of reconfigurable machining process plan with kinematic configuration /

By Muhammad Ameer. Islamabad: CEME NUST, 2018 . 59 p. : 30cm..

Place Hold on Feature clustering based approach for generation of reconfigurable machining process plan with kinematic configuration /

TH-SOF-1573-Development of Zero-Backlash Servo Actuator /

By Saeed, Mudasar. Islamabad: CEME NUST, 2018 . 40 p. : 30cm..

Place Hold on TH-SOF-1573-Development of Zero-Backlash Servo Actuator /

Energy and Exergy Analysis of steam power plant in Pakistan /

By Husnain, Naveed. Islamabad: PNEC NUST, 2014 . 75 p. : 30cm..

Place Hold on Energy and Exergy Analysis of steam power plant in Pakistan /

CFD and Heat Transfer Analysis of Dimpled Plate Heat Exchange /

By Ahmed, Hassan. Islamabad: PNEC NUST, 2015 . 78 p. : 30cm..

Place Hold on CFD and Heat Transfer Analysis of Dimpled Plate Heat Exchange /

Numerical Study of Aerodynamic Performance of Unibump over the Surface of AirFoil /

By Ali, Asif. Islamabad: PNEC NUST, 2016 . 67 p. : 30cm..

Place Hold on Numerical Study of Aerodynamic Performance of Unibump over the Surface of AirFoil /

COMPUTATIONAL FLUID DYNAMICS ANALYSIS & MODIFICATION OF SOLAR PHOTOVOLTAIC (PV) MODULES /

By Muhammad Khalilullah.. Islamabad: PNEC NUST, 2015 . 75 p. : 30cm..

Place Hold on COMPUTATIONAL FLUID DYNAMICS ANALYSIS & MODIFICATION OF SOLAR PHOTOVOLTAIC (PV) MODULES /

Energy & Exergy Analysis of Double Side Triangular Enclosure Solar Water Heater /

By Muhammad Irfan Tahir.. Islamabad: PNEC NUST, 2015 . 65 p. : 30cm..

Place Hold on Energy & Exergy Analysis of Double Side Triangular Enclosure Solar Water Heater /

Numerical Study on Friction Induced Noise and its Relationship with Wear for two Bodies in Contact /

By Lashari, Ali Adil. Islamabad: PNEC NUST, 2017 . 88 p. : 30cm..

Place Hold on Numerical Study on Friction Induced Noise and its Relationship with Wear for two Bodies in Contact /

Application of Mathematical and Statistical Techniques for Analysis of Machinery Defects /

By Hussain, Murtaza. Islamabad: PNEC NUST, 2014 . 68 p. : 30cm..

Place Hold on Application of Mathematical and Statistical Techniques for Analysis of Machinery Defects /

An Investigation of The Influence of Various Control Variables Including Work Piece Hardness On The Machining Responses And Multi Response Optimization For Wire Electric Discharge Machining /

By Muhammad Ikram ul Haq.. Islamabad: PNEC NUST, 2012 . 105 p. : 30cm..

Place Hold on An Investigation of The Influence of Various Control Variables Including Work Piece Hardness On The Machining Responses And Multi Response Optimization For Wire Electric Discharge Machining /

STUDY THE EMPIRICAL RELATION BETWEEN THE ACOUSTIC SIGNALS AND MULTI CONTACT WEAR MECHANISMS /

By Basit, Kinza . Islamabad : PNEC - NUST, 2015 . xi, 52 p. : ill. ; 30cm..

Place Hold on STUDY THE EMPIRICAL RELATION BETWEEN THE ACOUSTIC SIGNALS AND MULTI CONTACT WEAR MECHANISMS /

Energy and Exergy analysis of a 150TPH Steam Generation Plant in Pakistan /

By Mohammad Shujjat Abbas.. Islamabad: PNEC NUST, 2014 . 124 p. : 30cm..

Place Hold on Energy and Exergy analysis of a 150TPH Steam Generation Plant in Pakistan /

CFD Design and Analysis of Two-Stage Ejector for High-Altitude Testing of Satellite Thrusters /

By Rizwan, Hamza. Karachi : PNEC - NUST, 2015 . iv, 84 p. : ill. ; 30cm..

Place Hold on CFD Design and Analysis of Two-Stage Ejector for High-Altitude Testing of Satellite Thrusters /

Analysis of Integrated Solar Organic Rankine Cycle /

By Ejaz, Jehanzaib . Karachi : PNEC - NUST, 2015 . 87 p. : ill. ; 30cm..

Place Hold on Analysis of Integrated Solar Organic Rankine Cycle /

PERFORMANCE ASSESMENT OF ALTERNATE REFRIGERANTS FOR RETROFITTING R22 BASED AIR CONDITIONING SYSTEM /

By UMAR SAEED, MIAN. Karachi : PNEC - NUST, 2016 . 66 p. : ill. ; 320cm..

Place Hold on PERFORMANCE ASSESMENT OF ALTERNATE REFRIGERANTS FOR RETROFITTING R22 BASED AIR CONDITIONING SYSTEM /

Optimum Design of a Functionally Graded Pin Fin Used in Microelectronics /

By Fahim, Syed Faran. Islamabad: PNEC NUST, 2013 . 50 p. : 30cm..

Place Hold on Optimum Design of a Functionally Graded Pin Fin Used in Microelectronics /

Study of effect of number of baffle Plates on Heat Transfer in a Shell and Tube Heat Exchange Using CFD /

By Aziz, Abdullah. Islamabad: PNEC NUST, 2015 . 33 p. : 30cm..

Place Hold on Study of effect of number of baffle Plates on Heat Transfer in a Shell and Tube Heat Exchange Using CFD /

Possibilities of Power Generation in Pakistan from Geothermal Energy Resources /

By Mustaqeem, Syed Ahsan. Islamabad: PNEC NUST, 2014 . 105 p. : 30cm..

Place Hold on Possibilities of Power Generation in Pakistan from Geothermal Energy Resources /

ENERGY AND EXERGY ANALYSIS OF SOLAR DESALINATION PLANT FOR OPTMUM PERFORMANCE ANALYSIS /

By Abbas, Nasir. Islamabad : PNEC - NUST, 2018 . vii, 71 p. : ill. ; 30cm..

Place Hold on ENERGY AND EXERGY ANALYSIS OF SOLAR DESALINATION PLANT FOR OPTMUM PERFORMANCE ANALYSIS /

CFD ANALYSIS OF BIO-INSPIRED CORRGATED AIRFOIL /

By M. Tayyab, Syed. Islamabad : PNEC - NUST, 2018 . 145 p. : ill. ; 30cm..

Place Hold on CFD ANALYSIS OF BIO-INSPIRED CORRGATED AIRFOIL /